Back
Brand
Humidity
Electrical Connectors
Approvals & Certifications
Isolation
Channels
Accuracy
Temperature Coefficient
Power Options
Load
Enclosure, Body Material
Input
Operating Temperature
Display
Power Supply
Communication
Deadband
Range
Storage Temperature
Loop Resistance
Environmental Protection
Function
Output
Thermal Drift
Update Time
Delay Time
Rating
Programming
Input Impedance
Linearization
Mounting
Output Noise
Current
Relay Operation
In stock
Panel Meter – DM61
Description
- Power Supply – 85-265 Vac
- Output Options – No Output
-
Description
Brand
Humidity
- 0 to 90 % Relative Humidity, Non-Condensing
Electrical Connectors
- 12 to 22 AWG Wire
- Digital I/O
- RJ45 for External Relays
- Screw Terminal
- Serial Communication Adaptor Kit
Approvals & Certifications
- ISO 9001
- CE
- UL E160849, 508 Industrial Control Equipment
Isolation
- 4 kV Input/Output-to-Power-Line
- 500 V Input to Output or Output to P+ Supply
Channels
- 4-Digital Inputs & 4-Digital Outputs Per Module
Accuracy
- ± 0.03 % of Span ± 1 Count
- ± 0.1 % of Span ± 0.004 mA
- Square Root & Programmable Exponent: 10 to 100 % of Calibrated Span
Temperature Coefficient
- 0.005 % of Calibrated Span/°C, Max.
- 0.01 % of Calibrated Span/°C, Max.
Power Options
- 85-265 Vac, 50/60 Hz
- 90-265 Vdc, 20 W, Max.
- Jumper Selectable 12-24 Vdc ± 10 %, 15 W, Max.
Load
- Inductive Load: 1-1/4 hp at 125-250 Vac
- Resistive Load: 3 A at 120-250 Vac
- Resistive Load: 3 A at 30 Vdc
Enclosure, Body Material
- 1/8 DIN, High Impact Plastic, UL 94V-0 (Black)
Input
- ± 10 Vdc (0-5 V, 1-5 V, 0-10 V)
- 0-20 mA
- 4-20 mA
- Digital Input Logic: 0-1.25 Vdc Low
- Digital Input Logic: 3-5 Vdc High
- Overload: 30 Vdc, Max.
Operating Temperature
- -40° to 65° C (-40° to 149° F)
Display
- 2 Lines of 6-Digits
- -99999 to 999999
- Red LEDs with Leading 0 Blanking
- Upper: 0.60” High, Lower: 0.46” High
Power Supply
- External Loop Power Supply: 35 Vdc, Max.
- Isolated Transmitter: 10 Vdc at 50 mA – Max.
- Isolated Transmitter: 12-24 Vdc at 100 mA – Max.
- Isolated Transmitter: 24 Vdc ± 5 % at 200 mA – Max.
- Isolated Transmitter: 5 Vdc at 50 mA – Max.
Communication
- Baud Rate: 300 to 19,200 bit/sec
- Data Length: 8-bits (1 Start Bit, 1 or 2 Stop Bits)
- Modbus RTU
Deadband
- 0 to 100 % of Span
Range
- Scaling Range: 1 to 23 mA for Any Display Range
Storage Temperature
- -40° to 85° C (-40° to 185° F)
Loop Resistance
- Output Loop Resistance: 10 to 700 ohms at 24 Vdc
- Output Loop Resistance: 100 to 1,200 ohms at 35 Vdc (External)
Environmental Protection
- Front Panel: IP65
- Front Panel: NEMA 4X
- IP66
Function
- High & Low Alarms
- Linear
- Math Function
- Password Protection
- Programmable Exponent
- Round Horizontal Tank Volume Calculation
- Square Root
Output
- Analog Output Programming: 23 mA – Max.
- Digital Output Logic: 0-0.4 Vdc Low
- Digital Output Logic: 3.1-3.3 Vdc High
Thermal Drift
- 0.4 µA/°C, Max.
- 0.8 µA/°C, Max.
Update Time
- 200 milliseconds
Delay Time
- 0 to 999.9 seconds
- Transmit Time Delay: 0 to 199 milliseconds or Transmitter Always on for RS-422
- Turn Around Delay: < 2 milliseconds
Rating
- Relay: 2 or 4 SPDT (Form C)
- Relay: 4 SPST (Form A)
Programming
- Cloning Using Copy Function
- Digital Inputs
- Modbus Registers
- Panel Buttons
- PC & DPM ProView Software
Input Impedance
- Current Ranges: 50 to 100 ohms (Depending on Resettable Fuse Impedance)
- Voltage Ranges: > 1 megaohms
Linearization
- Multi-Point Linearization: 2 to 32-Points for PV or PV1
- Multi-Point Linearization: 2 to 8-Points for PV2 (Dual-Scale Level Feature)
Mounting
- Panel Mount Bracket
Output Noise
- Normal Mode Rejection: > 60 dB at 50/60 Hz
Current
- Fuse: 5 A, Max.
- Sink: 1.5 mA Min.
- Source: 10 mA – Max.
Relay Operation
- Automatic (Non-Latching)
- Fail-safe
- Latching (Requires Manual Acknowledge)
- Off (Disable Unused Relays & Enable Interlock Feature, Manual ON/OFF Control Mode)
- Pump Alternation Control (2 to 8 Relays)
- Sampling (Based on Time)